New Features Of Hydraulic Press Brake

Press brake is one of important sheet metal forming machinery. It's mainly used to bend the metal into different angles. Now, the hydraulic press brake has instead of a mechanical bender at all. But most people do not be familiar with this new machine, so, we would like to introduce its features to clarify everyone:

1. Steel welded structure

Old mechanical bender is made of iron while the new hydraulic press brake is made of 100% steel. Due to the hardness of steel, so, the structure is much more firm. It also eliminates built-in stress, under this situation; the machine can use a longer time.

2. Two cylinders controlling the beam's vertical moving

New press brake uses two oil cylinders to control the upper die and this can reach the best balance. So, we ask the operators not to bend metal near to the edge only. This will lose the balance of cylinders.

Image result for hydraulic repair service

3. Mechanical torsion shaft

The advantage is to make two cylinders to work at the same time. Hydraulic Repairs in Sydney, Perth & Brisbane very popular torsion in the world now. We spent several years to improve this into mature. You can see more info in the manual.

4. Hydraulic system

Now that this is a hydraulic press brake, so, the hydraulic system must be very important. It is instead of mechanical power because the power output is very stable. Furthermore, you can find repair service in a local place, because the hydraulic system has been used in the whole world.

5. Motorized back gauge

The gauge has been controlled by the electric device through buttons, then, there is a digital panel in the front. You can enter the data to use them; of course, you also can adjust them by hand if you want more accurate aim.

6. Concise control

Under the CNC system, the X axis and Y axis can be controlled by a computer. That means that it can realize robotization. It suits to produce large quantity under the same specification.

7. Standard punching tools

This package would include standard die. This die has four sides and it can meet the main requirements. If you need special press brake to die, you can also order from suppliers or local mold factory.

8. Foot pedal

The foot pedal of press brake is different from a shearing machine. When you push, it will work. If you would not continue to press, the upper die will keep the same situation; this is convenient for the operator to make the further adjustment of metal.